Copyright © Jinan Lijiang Automation Equipment Co., Ltd. 鲁ICP备20003150号-1
Mobile:+86 18678875966
Address :Block B 1307, Green Square, Huaiyin District, Jinan city, Shandong province, China
Jinan Lijiang Automation Equipment Co., Ltd.
Mailbox::info@lijiang-glass.com
Contact::June
PRODUCTS
Jinan Lijiang Automation Equipment Co., Ltd.
LJZW2020 Automatic spacer bending machine
- Application
Automatic spacer bending machine is a special equipment for making aluminum frames of insulatingglass, which replaces the traditional fabrication technology. This equipment can make a variety of convex polygonal aluminum frames by one aluminum strip in one time, thus strengthening the strength of the aluminum frame, making the sealing effect of the insulating glass more better.
- Equipment details
- Adopt Siemens PLC control system
- There are 4 Siemens servo
- Adopt 12 sets ofracks which could storage more different sizes of spacers. Use Siemens servo to change different racks.
- Automaticallycut and feed aluminum spacers
- Bend shaped spacer framescontinuously
- Automatically avoid the connecting corner while bending and cutting
- The machine grabs the spacer from the top instead of grabbing the spacer from bottom, solving the old-fashioned reversing problem.
- Using industrial computer technology which could realize the on-site drawing by workers on the industrial computer and directly bending the drawn graphics.
- The special machine hand device is used to bend big spacer frame
lHeavy duty connectors is convenience and safety for installation and debugging.
lSpare parts of all machine have ID codes.
lPrecise bending effect, corner error less than 0.1mm.
²Leading Technology
nSpacer printing code function(Optional)
nAutomatic drill gas filling hole(Optional)
nPrinting paper label sticker function (Optional),could remove it easily.
nUSB input function, read the excel format file directly etc(Optional)
nConnect to ERP system (Optional)
nCan bend aluminum spacer ,Technoform, Alupro, Thermix, warm spacer (Swisspacer) and stainless steel (Optional) and so on.
nWe have the special soft system which could avoid the 120mm to reduce waste. For example, if the length of the gusset is 60mm, when the program calculates the right angle, there is a gusset. When you start to bend the rectangular frame, you need firstly transport 120mm, then cut 120mm, and then step on the pedal to bend frame, so you will waste the 120mm.
Main Main Feature
• Germany Siemens PLC control system
• Japan Fuji CNC servo control system
• Four spacer size storage units
• Optional for different specification and size aluminum spacer
• Auto spacer connecting and cutting function
• Automatically avoid the connection while bending and cutting
• Continuous bending
• Bending stainless steel spacer, TECHNOFORM warm edge spacer, SWISS spacer and aluminum spacer
• Distinctive bending structure with more powerful function
• Pause&reset device, convenient for machine malfunction maintenance,protect the servo motor
• USB input function, read the excel sheet directly( Optional)
• Spacer printing function (Optional)
Main Technical Parameter
Max.bending size |
2000mm*2000mm |
Min.bending size |
250mm*200mm |
Aluminum spacer width |
5.5-24mm |
Dimensional error: |
≤±0.5mm |
Angle error |
≤±1º |
Processing speed |
≤26s |
Air supply |
≥0.65MPa |
Total power |
AC220/380V 50Hz 2.5KW |
Dimension |
10500mm*2200mm*2600mm |
Electrical parameters
NAME |
BRAND |
NAME |
BRAND |
PLC |
GERMAN SIEMENS |
Triplet |
Taiwan AIRTAC |
Low voltage electrical apparatus |
GERMAN SIEMENS |
Cylinder |
Taiwan AIRTAC |
Servo motor |
GERMAN SIEMENS |
Solenoid valve |
Taiwan AIRTAC |
Servo driver |
GERMAN SIEMENS |
Switch power |
Taiwan TEND |
Relay |
JAPAN OMRON |
TOUCH SCREEN |
Taiwan WEINVIEW |
Sensor |
KOREA AUTONICS |
GUIDE |
Taiwan TBI |